SWI-Prolog can be executed in one of the following modes:
swipl --helpswipl --versionswipl --archswipl --dump-runtime-variables- These options must appear as only option. They cause Prolog to print an
informational message and exit. See section
2.4.1.
swipl [option ...] script-file
[arg ...]- These arguments are passed on Unix systems if file that starts with
#!/path/to/executable
[option ...] is executed. Arguments after the script file are
made available in the Prolog flag argv.
swipl [option ...] prolog-file
... [[--] arg ...]- This is the normal way to start Prolog. The options are described in
section 2.4.2, section
2.4.3 and section 2.4.4.
The Prolog flag argv
provides access to arg ... If the options are
followed by one or more Prolog file names (i.e., names with extension
.pl, .prolog
or (on Windows) the user preferred extension registered during
installation), these files are loaded. The first file is registered in
the Prolog flag
associated_file.
In addition, pl-win[.exe] switches to the directory in which this
primary source file is located using working_directory/2.
swipl -o output -c prolog-file
...- The -c option is used to compile a set of Prolog files
into an executable. See section
2.4.5.
swipl -o output -b bootfile prolog-file
...- Bootstrap compilation. See section
2.4.6.
- --arch
- When given as the only option, it prints the architecture identifier
(see Prolog flag arch)
and exits. See also
-dump-runtime-variables. Also available as
-arch.
- --dump-runtime-variables [=format]
- When given as the only option, it prints a sequence of variable settings
that can be used in shell scripts to deal with Prolog parameters. This
feature is also used by swipl-ld (see section
12.5). Below is a typical example of using this feature.
eval `swipl --dump-runtime-variables`
cc -I$PLBASE/include -L$PLBASE/lib/$PLARCH ...
The option can be followed by =sh to dump in POSIX shell
format (default) or =cmd to dump in MS-Windows cmd.exe
compatible format.
- --help
- When given as the only option, it summarises the most important options.
Also available as -h and -help.
- --version
- When given as the only option, it summarises the version and the
architecture identifier. Also available as -v.
- --home=DIR
- Use DIR as home directory. See section
12.6 for details.
- --quiet
- Set the Prolog flag verbose
to
silent, suppressing informational and banner messages.
Also available as -q.
- --nodebug
- Disable debugging. See the current_prolog_flag/2
flag
generate_debug_info
for details.
- --nosignals
- Inhibit any signal handling by Prolog, a property that is sometimes
desirable for embedded applications. This option sets the flag
signals to
false.
See section
12.4.22.1 for details. Note that the handler to unblock system calls
is still installed. This can be prevented using --sigalert=0
additionally. See --sigalert.
- --nothreads
- Disable threading for the multi-threaded version at runtime. See also
the flags threads and gc_thread.
- --pldoc [=port]
- Start the PlDoc documentation system on a free network port and launch
the user's browser on
http://localhost:port. If
port is specified, the server is started at the given port
and the browser is not launched.
- --sigalert=NUM
- Use signal NUM (1 ... 31) for alerting a thread. This is
needed to make thread_signal/2,
and derived Prolog signal handling act immediately when the target
thread is blocked on an interruptable system call (e.g., sleep/1,
read/write to most devices). The default is to use
SIGUSR2.
If NUM is 0 (zero), this handler is not installed. See prolog_alert_signal/2
to query or modify this value at runtime.
- --no-tty
- Unix only. Switches controlling the terminal for allowing
single-character commands to the tracer and get_single_char/1.
By default, manipulating the terminal is enabled unless the system
detects it is not connected to a terminal or it is running as a
GNU-Emacs inferior process. See also tty_control.
- --win_app
- This option is available only in swipl-win.exe and is used for
the start-menu item. If causes plwin to start in the folder
...\My Documents\Prolog or local equivalent thereof (see
win_folder/2).
The Prolog subdirectory is created if it does not exist.
- -O
- Optimised compilation. See current_prolog_flag/2
flag
optimise for
details.
- -l file
- Load file. This flag provides compatibility with some other
Prolog systems.10YAP, SICStus
It is used in SWI-Prolog to skip the program initialization specified
using initialization/2
directives. See also section
2.10.2.1, and initialize/0.
- -s file
- Use file as a script file. The script file is loaded after
the initialisation file specified with the -f file
option. Unlike -f file, using -s
does not stop Prolog from loading the personal initialisation file.
- -f file
- Use file as initialisation file instead of the default
.swiplrc (Unix) or swipl.ini (Windows). `-f none'
stops SWI-Prolog from searching for a startup file. This option can be
used as an alternative to -s file that stops
Prolog from loading the personal initialisation file. See also section
2.2.
- -F script
- Select a startup script from the SWI-Prolog home directory. The script
file is named
<script>.rc. The default
script name is deduced from the executable, taking the
leading alphanumerical characters (letters, digits and underscore) from
the program name. -F none stops looking for
a script. Intended for simple management of slightly different versions.
One could, for example, write a script iso.rc and then
select ISO compatibility mode using pl -F iso or make a
link from iso-pl to
pl.
- -x bootfile
- Boot from bootfile instead of the system's default boot file.
A boot file is a file resulting from a Prolog compilation using the
-b or -c option or a program saved
using
qsave_program/[1,2].
- -p alias=path1[:path2 ... ]
- Define a path alias for file_search_path. alias is the name
of the alias, and arg path1 ... is a list of values for the alias. On
Windows the list separator is
;:
- --traditional
- This flag disables the most important extensions of SWI-Prolog version 7
(see section 5) that
introduce incompatibilities with earlier versions. In particular, lists
are represented in the traditional way, double quoted text is
represented by a list of character codes and the functional notation on
dicts is not supported. Dicts as a syntactic entity, and the predicates
that act on them, are still supported if this flag is present.
- --
- Stops scanning for more
arguments, so you can pass arguments for your application after this
one. See current_prolog_flag/2
using the flag argv for
obtaining the command line arguments.
As of version 7.7.14 the stacks are no longer limited individually.
Instead, only the combined size is limited. Note that 32 bit
systems still pose a 128Mb limit. See section
2.20.1. The combined limit is by deault 1Gb on 64 bit machines
and 512Mb on 32 bit machines.
For example, to limit the stacks to 32Gb use the command below. Note
that the stack limits apply per thread. Individual threads may
be controlled using the stack_limit(+Bytes) option of
thread_create. Any thread can call set_prolog_flag(stack_limit,
Limit) (see
stack_limit) to
adjust the stack limit. This limit is inherited by threads created from
this thread.
$ swipl --stack_limit=32g
- --stack_limitsize[bkmg]
- Limit the combined size of the Prolog stacks to the indicated size. The
suffix specifies the value as bytes, Kbytes,
Mbytes or Gbytes.
- -table_spacesize[bkmg]
- Limit for the table space. This is where tries holding
memoized11The letter M is used
because the T was already in use. It is a memnonic for Memoizing.
answers for
tabling are stored. The default is 1Gb on 64 bit machines
and 512Mb on 32 bit machines. See the Prolog flag
table_space
- -g goal
- Goal is executed just before entering the top level. This
option may appear multiple times. See section
2.3 for details. If no initialization goal is present the system
calls version/0
to print the welcome message. The welcome message can be suppressed with
--quiet, but also with -g true. goal
can be a complex term. In this case quotes are normally needed to
protect it from being expanded by the shell. A safe way to run a goal
non-interactively is below. If go/0 succeeds
-g halt causes the process to stop with exit
code 0. If it fails, the exit code is 1; and if it raises an exception,
the exit code is 2.
% swipl <options> -g go -g halt
- -t goal
- Use goal as interactive top level instead of the default goal
prolog/0.
The goal can be a complex term. If the top-level goal
succeeds SWI-Prolog exits with status 0. If it fails the exit status is
1. If the top level raises an exception, this is printed as an uncaught
error and the top level is restarted. This flag also determines
the goal started by break/0
and abort/0.
If you want to prevent the user from entering interactive mode, start
the application with `-g goal -t halt'.
- -c file ...
- Compile files into an `intermediate code file'. See section
2.10.
- -o output
- Used in combination with -c or -b to
determine output file for compilation.
The following options are for system maintenance. They are given for
reference only.
- -b initfile ...-c file ...
- Boot compilation. initfile ... are compiled by the C-written
bootstrap compiler, file ... by the normal Prolog compiler.
System maintenance only.
- -d token1,token2,...
- Print debug messages for DEBUG statements tagged with one of the
indicated tokens. Only has effect if the system is compiled with the
-DO_DEBUG flag. System maintenance only.